Cycle Repairing and Adjusting
With a Chapter on building a Bicycle from a Set of Parts
År: 1916
Forlag: Cassell and Company, LTD
Sted: London, New York, Toronto and Melbourne
Sider: 152
UDK: 629.118
With 79 Illustrations
Søgning i bogen
Den bedste måde at søge i bogen er ved at downloade PDF'en og søge i den.
Derved får du fremhævet ordene visuelt direkte på billedet af siden.
Digitaliseret bog
Bogens tekst er maskinlæst, så der kan være en del fejl og mangler.
ii6
CYCLE REPAIRING
ment of the lock nuts (76 and 77) enables the hub to
be sent out by the makers correctly adjusted. The
makers recommend that the hub be kept clean and washed
76a 76 77 78
Fig. 53.—Parts of “Torpedo
Coaster Hub
out from time to time with
*
petrol ; for this purpose the
wheel should be laid on the
ground, step side downwards
and petrol injected through
the lubricator in the hub
shell, after which the hub
must be thoroughly lubri-
cated. In order that the
lubricating oil may run into
all parts of the hub, it is also advisable to inject a cer-
tain quantity of oil between the driving sleeve (88) and
axle (91), and this is best done while the machine is still