Cycle Repairing and Adjusting
With a Chapter on building a Bicycle from a Set of Parts
År: 1916
Forlag: Cassell and Company, LTD
Sted: London, New York, Toronto and Melbourne
Sider: 152
UDK: 629.118
With 79 Illustrations
Søgning i bogen
Den bedste måde at søge i bogen er ved at downloade PDF'en og søge i den.
Derved får du fremhævet ordene visuelt direkte på billedet af siden.
Digitaliseret bog
Bogens tekst er maskinlæst, så der kan være en del fejl og mangler.
CYCLE REPAIRING
CHAPTER I
The Complete Overhauling of a Bicycle
This chapter will deal thoroughly with the overhauling of
a machine which has been laid by for some time, or which
has even been in constant use, but which would be all
the better for a thorough overhaul and adjustment. It
is surprising how much better a machine will run
after it has been properly cleaned and adjusted, and
the result is, without doubt, well worth the time
expended.
It will assist every cyclist, and especially the cycle
maker and repairer, to familiarise himself with the anatomy
of a typical machine. That shown in the diagram (Fig. 1)
is of no particular make, but is representative of the every-
day modern bicycle. The full set of parts illustrated by
Figs. 2 to 5 are of the Rudge-Whitworth machine, and the
reference numbers tally with those on the diagram, Fig. 1,
but it will be observed that some of the details necessarily
vary from those shown in the complete machine, which,
as already explained, does not show any special model.
The type of machine shown by these figures is the universal
chain-driven “ safety ” ; but most readers will be aware
that there is one other broad type in existence, that in
which the impulse given by the rider’s feet is conveyed