Shop Management
Forfatter: Frederick Winslow Taylor
År: 1911
Forlag: Harper & Brothers Publishers
Sted: New York and London
Sider: 207
UDK: 658.01 Tay
With an introduction by Henry R. Towne
Søgning i bogen
Den bedste måde at søge i bogen er ved at downloade PDF'en og søge i den.
Derved får du fremhævet ordene visuelt direkte på billedet af siden.
Digitaliseret bog
Bogens tekst er maskinlæst, så der kan være en del fejl og mangler.
86
_____ ___________
SHOP MANAGEMENT
____________________________________________________________________
Machine shop......................................................
Order for ..........................................Tires...........
Do work on Tire No ...............................................
As follows and per blue print........................................
Tem- plet Size to be cut to Depth of cut Driving belt Feed Rate Time this operation should take
Surface to be ma- chined
Set tire on machine ready to turn....
Rough face front edge Finish face front edge Rough bore front...
Finish bore front...
Rough face front I. S.C
Cut out filled
Rough bore front I. S.F
Rough face back edge Finish face back edge Finish bore back . ..
Rough bore back ...
Rough face back I. S.F
Cut out filled
Cut recess
Rough turn thread. .
Finish turn thread ..
Rough turn flange ..
Finish turn edge....
Clean fillet of flange. Remove tire from machine and clean face plate
Figure 1. — Tire-Turning Instruction Card
they were finally boxed for shipment. Many millions
of these balls were inspected annually. When the
writer undertook to systematize this work, the fac-