Cylinder Oil 600 W What Is For, What Will It Do 1920

GARGOYLE CYLINDER OIL 600 W exhaust steam and feed water than do compounded cylinder oils. But, due to the superior lubricating quality of Gar- goyle Cylinder Oil 600 W, it can be used very sparingly under these condi tions with entirely satisfactory results. By using Gargoyle Cylinder Oil 600 W, feeding as little as possible, through a reliable lubricator, there will be only a small amount of oil in the exhaust steam to get rid of. Procedure in Introducing Gargoyle Cylinder Oil 600 W When introducing Gargoyle Cylinder Oil 600 W for the first time, the rate of feed should be maintained the same as the oil previously used, for the first two days, after which the rate of feed should be gradually decreased until the minimum feed by which smooth and satisfactory running can be accomplished, is determined. It is not until the internal frictional surfaces have assumed a good working skin with a smooth, glossy, appearance that the rate of feed of Gargoyle Cylinder Oil 600 W can be reduced to its minimum. It takes time for Gargoyle Cylinder Oil 600 W to produce a good working skin. It takes much longer, in faet, than it does for an unsuitable cylinder oil to destroy a good surface that has been produced by the use of Gargoyle Cylinder Oil 600 W. After the engine has been in operation some time on the minimum feed of Gargoyle Cylinder Oil 600 W, the cylin- 1.7