History of the Typewriter
Forfatter: Geo. Carl Mares
År: 1909
Forlag: Guilbert Pitman
Sted: London
Sider: 318
Søgning i bogen
Den bedste måde at søge i bogen er ved at downloade PDF'en og søge i den.
Derved får du fremhævet ordene visuelt direkte på billedet af siden.
Digitaliseret bog
Bogens tekst er maskinlæst, så der kan være en del fejl og mangler.
___ 114 —
The power of a typewriter in manifolding and stencil
cutting, is one of the most important points for consideration
when investing. If the success of the Oliver were dependent
upon this point alone, then there would be no room for
question. It is a most powerful and energetic manifolder.
As the types all strike on top of the platen, a score of carbon
copies can be taken at once, without the least deviation
from the strictly accurate alignment which marks all Oliver
work of a single copy. And the fact that most of the
Duplicator Companies use the Oliver to demonstrate their
own appliances is proof positive of its value in this respect.
Particular note should be taken of the fact that each type-
block is soldered firmly on to the type-bar, and is not, as in
most cases of type-bar machines, wedged on to the bar. Thus
no type-block can ever become detached and drop off into
the machine.
The features of the Oliver are as numerous as the machine
itself is noted for its simplicity. It is being worked in
this country by an energetic and capable body of men,
who, from all accounts, are meeting with the greatest
possible success.
It is interesting to note, also, that the Oliver Typewriter
Company, Limited, recognising the importance of securing
the goodwill of the operator, has founded a body called
the Oliver Club, a purely social organization to which
operators of all machines are eligible for membership.
Arising out of this Club they issue a monthly journal, the
Oliver Magazine, in which the doings of the club and the
latest details concerning the machine are recorded.
The following are the chief characteristics of the four
models of the Oliver.
No. i. The paper feed was original, and peculiar.
The swinging of a handle on the left side of the carriage
threw the feed roll out, and permitted the paper to be fed
in from the lower edge of the sheet. It was very good
for envelope and post-card work. The ribbon spools
were not covered, and in order to reverse the ribbon, the
shaft had to be lifted out of a groove on one side, and
the shaft on the other side put back.
No. 2. This introduced the ribbon reverse, and the
present form of carriage, together with sundry other useful
improvements.
No. 3. Introduced the right and left margin release
keys, complete paper release, margin guide, etc.
No. 4. Introduced an extended keyboard, covering
fractions or other special signs as might be wanted for