Søgning i bogen
Den bedste måde at søge i bogen er ved at downloade PDF'en og søge i den.
Derved får du fremhævet ordene visuelt direkte på billedet af siden.
Digitaliseret bog
Bogens tekst er maskinlæst, så der kan være en del fejl og mangler.
74
Remarks.
At the watertight frames
the pitch of the rivets is
'about 5".
the plates themselves, but the
are treble rivetted; the rivets
Double Angle Irons.
Outer Angle Irons.
Inner Angle Irons.
DoubleStrap, double rivetted.
do. do.
do. treble rivetted.
The pitch of rivets reduced
to 4" at watertight frames,
treble rivetted.
single rivetted.
The Bulkheads are of 1/2" and
7/16" plate, 1/2" below and
7/164 above the lower Deck,
the stiffeners 31/2" X 31/2"
X 9/16" Angle Iron 2' 6"
I apart, the principal bulk-
heads are attached to the
'wing passage thus (X) as
far down as the double
i bottom to which they are at-
Fortsat.
Rivets.
Pitch. | Size.
6"
6"
6"
6"
4" to 5"
do.
do.
do.
do.
do.
Breadth of Lap.
Thickness of Iron.
61/4"
6'/,"
51/2"
51/2"
51/2"
11/16" Pl. to 9/16" Angle Ir.
1" Pl. to 3/16" Angle Ir.
7/8" Pl. to 3/16" Angle Ir.
13/16" Pl to 3/16" Angle Ir.
17/16" to 11/8" Pl.
11/is" to 1" Pl.
1" to 1“ Pl.
1" to Vo" Pl.
7/8" to ’/a" Pl.
’/»" to 13/1674 Pl.
The butt straps to the outer bottom plates are of the same thickness as
less than the thickness of plating thev connect, and the whole of them
plating they connect.
rivets in the
being of the same diameter as the
„5/8
» GL
„5/18
„5h8
/G
„9
„RI
i
5/8" Angle Ir. to 1/2" Fr.
3/16" Angle Ir. to 1/2"&F/16" Pl.
1/2" Angle Ir. to 1/2" &7/16"Pl
5/16" strap to 1/2" Long.
5/164 strap to 7/6" Long.
5/16" strap to 1/2" Long.
| 1/g" Pl to 7/16" Angle Ir.
%€" Pl. to 1/9" Pl.
do do.
|7/16" Pl to 1/a" Pl.
op op
3/16" Angle Iron
Bellerophon« fortsat.
Description of Work.
Outside Bottom Plating to Frames,
do. do.
dn. do.
do. do.
The edges of outside bottom plating,
do. do.
do. do.
do. do.
do. do.
do. do.
Butt Straps to Outside Bottom Plating,
butt straps to the inner plates are 1/g"
Transverse Frame Angle Iron to the
10" X 31/2 " X 1/2 " frame
Angle Irons on outer edge of Longit. Fr.
Angle Irons on inner edge of Longit. Fr.
Butt Straps to Longitudinal Nr. 1.
do. do. Nr. 2,3 & 5.
do. to Nr. 4.
Inner Bottom.
Butt Straps to inner bottom.
Edge Strips to inner bottom.
Transverse Bulkheads.
Butts to transverse Bulkheads.
Stiffeners to Bulkheads.